Polycrystalline PV module
We offer you the highest quality and a product according to international standards. We produce : Sol P60.6-WF-220 and Sol P60.6-WF-225 solar modules.
Photovoltaic modules consist of:
1. Glass (tempered 4mm thick);
2. EVA (ethylene vinyl acetate, and 0.5 mm thick, odorless, transparent, shinymaterial that reflects UV rays, which, on both sides, covered with solar cell).
3. Solar cell (180-200 mm thick plate is soldered Sn / Ag bars);
4. The rear sheet (Tedlar / Polyester / Tedlar fluoropolymer polyester protects bothsides of the photo-degradation).
Mechanical parameters:
frame dimensions 1662x997x42 mm LxWxT
weight 23 ± 1kg
static load on the rear (1 hour). pressure 2400 N / m
the front of the static load (1 hour). pressure 2400 N / m
General Electric parameters:
maximum system voltage V DC 1000 V
peak inverse current Ir 18 A
Certificates, Class of security:
IEC 61215 Ed. II and IEC 61730 - TÜV Order No.21216945
security class - II
IP protection – 65
Warranty:
10 years 90% of nominal power
20 years 80% of nominal power
Electro Technical data for standard test conditions (STC) - irradiance 1000W / m²module temperature of 25 ˚ C, the spectrum of the AM (Air Mass) 1.5.
SOL P60.6-WF-220 SOL P60.6-WF-225
rated power @ STC PMAX - 220 W 225 W
voltage @ maximum power point VMPP - 3.28 V 6.28 V
current @ maximum power point Impp - 7.76 A 7.95 A
Open circuit voltage Voc - 36.0 V 36.4 V
short-circuit current ISC - 8.4 A 8.4 A
tolerance - 3% 3%
Temperature coefficient of Voc a β2 - 0.34 1/ K 0.36 1/ K
Temperature coefficient of Isc α2 – 0.03 1/K 0.03 1/K
Electro Technical Data nominal working temperature of the element (noctis - NominalOperating Cell Temperature) - irradiance of 800 W / m, air temperature 20 ˚ C, I (wind) 1.5 m / s.
SOL P60.6-WF-235
rated power @ NOCT PMAX - 156 W 160 W
voltage @ maximum power point VMPP - 2.53 V 2.56 V
current @ maximum power point Impp - 6.26 A 6.45 A
Open circuit voltage Voc - 34.4 V 34.8 V
short-circuit current ISC - 6.8 A 6.8 A
tolerance - 5% 5%